Product Details
Teaching tube for slit lamp characteristics
This digital slit lamp instrument belongs to Type I, Type BF is universal, has two application parts, and is powered by a single-phase net power supply to allow the instrument to run intermittently.
Blowing parts: the type of protection tube 250V 3A.
Replace the protection tube: unscrew the cover of the protection tube, replace it with a new one, and then recap it.
Technical Specification (Anterior Segment Photo) |
Model |
SLM-4ER |
Microscope Type |
Galileo Parallel |
Image Capturing Way |
Canon A800, 12Mega |
Magnifications change way |
Drum Five Magnifications |
Eyepiece Magnification |
12.5x |
Total Magnifications |
6X 10X 16X 25X 40X |
Diopter Adjustment |
-5D ~ +5D |
Illumination |
Five Steps (Stepless Optional) |
Slit Width |
0-14mm Continuous |
Slit Height |
1-14mm Continuous |
Slit Angle |
0°-180° Adjustable |
Slit Inclination Angle |
5° 10° 15° 20° |
Light Spot Diameter |
0.2mm,1mm,2mm,5mm,10mm,14mm |
Filter |
Heat Absorption;Grey;Redfree;Cobalt Blue |
Fixation |
Red LED |
Power |
Illumination Bulb |
German Osram Halogen Tungsten Lamp
LED Lamp (Optional) |
Input Voltage |
110V/220V(±10%) |
Input Power |
300VA |
Diffuse Lens |
Yes |
Preset Lens |
Yes |
Laser Interface |
Yes |
Using attention:
1. Electromagnetic compatibility instructions: This device may have potential electromagnetic interference with other devices during use. Do not place this device with other high -power devices, and keep it at least 1 meter away from other electromagnetic devices (such as mobile phones, cardiac pacemakers, etc.).
2. Environmental protection instructions: When the product or its components reach the scrap time limit, please comply with local laws and regulations for recycling.
3. The Teaching tube for slit lamp should be used in dark room and keep the product clean and dry. It should not be used in flammable, hot and dusty environment.
4. Do not touch lens surface with hand or hard object.
5. Avoid using high-brightness light to illuminate the patient's eyes for a long time.
6. Without permission of the company, we can not open the equipment shell without authorization, otherwise the company will not be responsible for the consequences.
7. In order to better maintain the equipment, if you need to turn it on again after turning off the power supply, you need to wait 5 seconds, computer part 15 seconds.
http://www.kanghua-dryeye.com/