1. The machine is mainly used for thin-walled aluminum tubes, especially for thin aluminum cutting, and can realize multiple saw cutting according to material size;
2. The cutting precision of aluminum tube is controlled within ±0.1mm; the spindle precision is within 0.01mm,cutting without burrs or deformation;
3. Using step cross feeding, more stable; matched with Fujire saw, special for cutting aluminum tube, sawing end face flat;
4. The machine comes with a micro-lubrication fuel injection system, using cutting oil, special for aluminum alloy, which can effectively improve the service life of the saw blade while improving the cutting quality.
5. It adopts square linear guide rail and screw rod feeding to ensure the stability of sawing processing;
6. Adopting self-developed lifting air float feeding device to ensure the precision of the processed parts and prevent the surface of materials from scratches.
7. The equipment is equipped with a fully enclosed protective cover, which makes the operation safer and more stable, to prevent aluminum chips from splashing and reduce the noise caused by cutting.
8. It is equipped with a two-way vacuum device to make the aluminum chips collection more completely and much easier for 7S management in the workshop.
Cut Surface Flatness
Cut Surface Squareness
Main Shaft Diameter
Saw Blade Diameter
Step Motor push
Automatic Feed Length
Main Shaft Precision
It is especially suitable for thin-walled aluminum tubes and thin-walled aluminum profiles. It can also be used for cutting aluminum ingots, heat sinks, mobile phone frames, aluminum alloy profiles, aluminum alloy corners, castings and other high-precision aluminum profiles.
1. Q: Can we cut the aluminum tube with a thickness of 1.0mm or below?
At present, most of the equipment on the market cut such as thin-walled aluminum tubes, which will cause pressing deformation and cutting deformation. How do you solve this problem?
A: It can be solved. Our equipment adopts the lifting air-floating feeding device independently developed by our company. It has patented protection. It can effectively prevent the deformation of the thin-walled material. Don’t worry!
2. Q: How long can the cut tail material be controlled?
A: The automatic aluminum pipe cutting machine can be adjusted to the manual cutting mode, then the max tail material utilization can be achieved. It can be said that there are no tailings; if it is the automatic cutting mode, the tailings can be controlled within 100mm, which greatly decreases the waste rate of tailings.
3. Q: Is there any equipment manual or video?
A: We will provide you with the English version of operation vide if you purchase our machine. Its operation is easy. It can automatically cut the material, as long as the parameters are set well.
4. Q: What is the after-sales service? Can we repair it by ourselves?
A: We offer a one-year warranty service for the mainframe, free technical guidance for life. If the equipment fails, we can provide online video guidance and repair videos to make your production no worries.